top of page
Screenshot 2026-07-02 150642_edited.png

Agi-Drive V8 Conversion Kit for WoodTech ProMix Systems

A plug-and-play conversion kit that upgrades compatible WoodTech ProMix systems to the Agi-Drive V8 platform.

The Agi-Drive V8 Conversion Kit provides a complete plug-and-play upgrade for compatible ProMix Original, LCD and SD systems.

Designed for straightforward installation, the kit replaces ageing ProMix control hardware with the Agi-Drive V8 system while retaining compatible existing truck and mixer wiring.

Why Choose the Agi-Drive V8 Conversion Kit?

  • Retains existing compatible ProMix wiring

  • Fast plug-and-play installation using the supplied crossover cable

  • Adds modern Agi-Drive V8 control features to the existing truck setup

  • Reduces installation time, downtime and upgrade costs

  • Australian-made hardware built for demanding heavy-duty use

ProMix SD

WoodTech Systems.jpg
WoodTech Promix Mini_edited.jpg

ProMix SD Mini

ProMix LCD

ProMix Original

Compatible WoodTech Systems

B2B Product Image (2 of 2).png

What's Included in the Kit?

  • Agi-Drive V8 HMI (In-Cab Display)

  • Agi-Drive V8 Distribution Module (Main Controller)

  • Agi-Drive V8 12-Button Radio Remote and Charging Cradle

  • 2x RJ45 Communication Cables 1.5m

  • RJ45 3‑Way Splitter Cable

  • Agi-Drive V8 to WoodTech ProMix 37-Pin Crossover Cable

  • DT4 to RJ45 Cable (Cruise Revs / Automatic Transmission Neutral Input)

  • 2x DT12 Hydraulic Jumper Plugs to Suit Rexroth or EDC

A Simple, Reliable, Field-Proven Upgrade

The Agi-Drive V8 Conversion Kit provides a practical way to upgrade ageing ProMix controls without replacing the complete truck and mixer harness. It is suitable for both individual truck conversions and fleet upgrades.

 

Contact Agi-Drive for compatibility advice, installation support or ordering information.

Important Notes

  • The existing ProMix system must use either the black 37-pin round plug or the 35-pin rectangular plug used on the ProMix SD Mini.

  • The conversion kit does not support systems that use actuators to control engine speed or the hydraulic pump.

  • CAN bus integration is available on supported trucks from 2006 onwards. Earlier trucks require hard-wired neutral and interlock inputs.

  • ​Typical installation time is 3–4 hours, provided there are no existing hardware issues. Phone technical support is available during installation.

bottom of page